SMART KTF 2000 – KTF/RW Operation
SMART KTF 2000 3B-45 -
SPEED - Reading the yarn feeding Speed
(in m/min)
of a KTF/RW Device
MEASUR
SPEED
This function allows you to read, in real time the yarn feeding speed with which
the selected KTF/RW device is working.
When you activate this function, a real time data exchange with the selected KTF
device, occurs; this condition is signaled by the flashing of
COM led on the relevant
device.
From the MEASUR menu, press
until the >SPEED menu option is selected.
At this point, press
to access the function.
NN = Number of KTF device, selectable using
, .
VVVV = Real time speed of device NN.
If the motor of device NN does not turn, after a few seconds the STOP condition is
indicated.
Press once
to leave the function and return to the MEASUR Menu, or twice
to return to Main Menu.
To Next Page
Loading...
