Buchi E-800 - Preparing the Twisselmann Extraction (with Chamber Heater)

BÜCHI Labortechnik AG Installation | 5
Operation Manual UniversalExtractor E-800 37/88
5.14 Preparing the Twisselmann Extraction (with chamber heater)
u Switch the On/Off master switch to Off.
u Prepare the condenser. See Chapter5.17
"Preparing the condenser", page40
u Prepare the extraction glass chamber univer-
sal. See Chapter5.15 "Preparing the extrac-
tion glass chamber universal", page38
u Pull the chamber rack.
u Put the extraction glass chamber universal in
the chamber rack.
u Connect the valve with the connection on the
installation board.
u Push the chamber rack in the instrument.