5 | Installation BÜCHI Labortechnik AG
38/88 Operation Manual UniversalExtractor E-800
5.15 Preparing the extraction glass chamber universal
NOTICE
Risk of broken parts by using tools
Using tools for preparing the instrument can break parts.
u Tighten all parts with your hands.
u Install the valve at the extraction glass cham-
ber universal.
u Install the sensor at the extraction glass cham-
ber universal.
NOTICE!Make sure that the lips of the sealing
show in the direction of the glass.
u Put the sealing on the bottom of the extraction
glass chamber universal.
The extraction glass chamber universal is pre-
pared.
To Next Page
Loading...