Buchi E-800 - Adjusting the Optical Sensor (Soxhlet, Soxhlet Warm and Hot Extraction); Preparing the Extraction Positions; Selecting a Method for All Extraction Positions

To Next Page

To Previous Page

BÜCHI Labortechnik AG Performing an extraction | 7

Operation Manual UniversalExtractor E-800 63/88

7.1.3 Adjusting the optical sensor (Soxhlet, Soxhlet Warm and Hot Extraction)

u Adjusting the optical sensor on the extraction

glass chamber universal.

 White line to the top of the sample.

Sample

7.2 Preparing the extraction positions

There are three options to prepare the extraction positions:

Option Explanation

Select a method for all extraction posi-

tions.

See Chapter7.2.1 "Selecting a method

for all extraction positions", page63

Select different methods for each extrac-

tion position.

See Chapter7.2.2 "Selecting different

methods for each extraction position",

page64

Select a programmed setup. See Chapter7.2.3 "Selecting a pro-

grammed setup", page64

7.2.1 Selecting a method for all extraction positions

Navigation path

➔

u Navigate to the [ Home ] menu via the navigation path.

u Tap the method.

ð The display shows a dialog with the selectable configurations.

u Select the method you wish to use.