Buchi E-800 - Changing the Name of a Solvent (Own Created Solvents Only); Changing the Chamber Heating Level (Option); Changing the Heating Level of a Solvent

BÜCHI Labortechnik AG Operating the interface pro | 6
Operation Manual UniversalExtractor E-800 59/88
u Tap the submenu [ Create own ].
ð The new solvent is created.
6.7.2 Changing the name of a solvent (own created solvents only)
Navigation path
➔
u Navigate to the [ Solvent ] menu via the navigation path.
u Tap the name of the solvent you wish to edit.
ð The display highlights the selection in green.
u Tap the function [ OK ] on the function bar.
ð The display shows the view Solvent.
u Tap the action [ Name ].
ð The display shows a dialog with an alphanumeric input box.
u Enter a name for the solvent.
u Tap the function [ Save ] on the function bar.
ð The new name is saved.
ð The dialog box closes.
6.7.3 Changing the chamber heating level (option)
Navigation path
➔
u Navigate to the [ Solvent ] menu via the navigation path.
u Tap the name of the solvent you wish to edit.
ð The display highlights the selection in green.
u Tap the function [ OK ] on the function bar.
ð The display shows the view Solvent.
u Tap the action [ Chamber heater level ].
ð The display shows a dialog box with a numeric input box.
u Enter a heating level for the solvent.
u Tap the function [ Save ] on the function bar.
ð The new name is saved.
ð The dialog box closes.
6.7.4 Changing the heating level of a solvent
Navigation path
➔
u Navigate to the [ Solvent ] menu via the navigation path.