Buchi E-800 - Setup Menu; Method Menu; Configuration Menu

BÜCHI Labortechnik AG Operating the interface pro | 6
Operation Manual UniversalExtractor E-800 49/88
6.3.2 Setup menu
The setup menu allows saving different methods for different extraction positions. See
Chapter6.5 "Selecting a method for an extraction position", page52
6.3.3 Method menu
The [ Method ] menu allows saving methods. See Chapter6.6 "Editing a method",
page52
6.3.4 Configuration menu
On the [ Configuration ] menu, you can enter a variety of settings and retrieve infor-
mation.
Submenu Settings
The submenu [ Settings ] contains system settings for the instrument.
Action Option Explanation
[ Language ] Choice of display lan-
guage on the interface
The following languages are avail-
able:
English/German/French/Italian/
Spanish/Japanese/Chinese
[ Date ] Date input Enter in sequence: Day, month,
year. Apply the settings by pressing
[ OK ].
[ Time ] Time input Enter in sequence: Minutes, hours.
Apply the settings by pressing
[ OK ].
[ Beeper ] Off/On Setting for audible signal in re-
sponse to input controls.
[ Display bright-
ness ]
Enter setting Display brightness level in %: 0 -
100
[ Configuration ] Choice of glassware The following glassware is available:
Universal glas / ECE
[ Mobile connection
QR code ]
View The control unit shows a QR code
for reading by the Extraction Reports
app.
[ Mobile connection
password ]
View The control panel shows a password
for entry in the Extraction Reports
app.
[ Network ] Enter value The following parameters can be
edited:
Device name/DHCP/MAC address/
System IP address/Subnet mask/
Gateway
[ Delete app con-
nection ]
Confirmation question Resets external connections to the
instrument.
[ Demo Mode ] On/Off Simulate an extraction.