6 | Operating the interface pro BÜCHI Labortechnik AG
50/88 Operation Manual UniversalExtractor E-800
Submenu Service
WARNING
Incorrect use of the actor settings.
Incorrect use of the actors settings can cause instrument damages and injuries.
u Carry out the actor setting as described.
Action Option Explanation
[ Sensors ] View All sensor signals can be observed:
Flow senor
Level sensors
Temp. chamber heater (option)
Analyte protection (option)
Protection shield
Valves
Lift current
Line voltage
Line frequency
[ Actors ] Open / close The following settings can be
changed:
Valves:
Soxhlet valves See Draining sol-
vent from Extraction glass cham-
ber Soxhlet
Tank valves See Chapter9.3
"Draining solvent from the instru-
ment", page72
Cooling water valve On/Off
Gas valve On/Off
Heater On/Off
Pump (solvent tank pump) On/Off
Lift current
Beeper On/Off
Chiller On/Off (option)
Submenu System Information
The submenu [ System information ] contains details of the connected devices and in-
formation on network connection diagnosis.
Action Option Explanation
To Next Page
Loading...