Buchi E-800 - Changing the Molecular Weight of a Solvent; Changing the Density of a Solvent

BÜCHI Labortechnik AG Operating the interface pro | 6
Operation Manual UniversalExtractor E-800 61/88
u Tap the function [ OK ] on the function bar.
ð The value for the enthalpy is saved.
ð The dialog box closes.
6.7.7 Changing the molecular weight of a solvent
Navigation path
➔
u Navigate to the [ Solvent ] menu via the navigation path.
u Tap the name of the solvent you wish to edit.
ð The display highlights the selection in green.
u Tap the function [ OK ] on the function bar.
ð The display shows the view Solvent.
u Tap the action [ Mol weight ].
u Tap the function [ OK ] on the function bar.
ð The display shows a dialog box with a numeric input box.
u Enter the mol weight for the solvent.
u Tap the function [ OK ] on the function bar.
ð The value for the mol weight is saved.
ð The dialog box closes.
6.7.8 Changing the density of a solvent
Navigation path
➔
u Navigate to the [ Solvent ] menu via the navigation path.
u Tap the name of the solvent you wish to edit.
ð The display highlights the selection in green.
u Tap the function [ OK ] on the function bar.
ð The display shows the view Solvent.
u Tap the action [ Density ].
u Tap the function [ OK ] on the function bar.
ð The display shows a dialog box with a numeric input box.
u Enter the density for the solvent.
u Tap the function [ OK ] on the function bar.
ð The value for the density is saved.
ð The dialog box closes.