Buchi E-800 - Selecting a Configuration; Disassembling the Condenser Circuit

5 | Installation BÜCHI Labortechnik AG
44/88 Operation Manual UniversalExtractor E-800
5.19 Selecting a configuration
Navigation path
➔ ➔ [ Settings ]
Precondition:
R Switch the On/Off master switch to On.
u Navigate to the [ Settings ] submenu via the navigation path.
u Tap the action [ Select configuration ].
ð The display shows a dialog with the selectable configurations.
u Tap the configuration according to the installed glass setup.
ð The configuration is selected.
ð The dialog box closes.
5.20 Disassembling the condenser circuit
u Disconnect the indicated condenser connec-
tion.
u Make sure, that there is no coolant in the con-
denser circuit.
u Disconnect the other condenser connections.
u Remove the flange lock.