Buchi E-800 - Preparing the Tank Bottle

5 | Installation BÜCHI Labortechnik AG
42/88 Operation Manual UniversalExtractor E-800
u Turn the condenser.
u Connect the solvent collector tube to the in-
stallation board
u Connect the condensers.
u Establish a condenser circuit.
u Make sure that the condenser circuit is com-
plete. See Chapter12.1 "Schematics",
page79
5.18 Preparing the tank bottle
NOTICE
Risk of broken parts by using tools
Using tools for preparing the instrument can break parts.
u Tighten all parts with your hands.