Burkert ME43 User Manual

Operating Instructions
Type ME43
Fieldbus gateway büS to Industrial Ethernet for
PROFIBUS DPV1, PROFINET, EtherNet/IP,
EtherCAT, Modbus TCP, CC-Link,

Burkert ME43 Specifications

General

Device Type	Gateway
Communication	Ethernet
Fieldbus protocols	PROFINET, EtherNet/IP, Modbus TCP
Power supply	24 V DC
Housing material	Polycarbonate
Protection class	IP65

Summary

Operating Instructions

Manual Symbols and Warnings

Explains symbols and warning types used throughout the manual for safety.

Key Term Definitions

Defines key terms and abbreviations used in the operating instructions.

Intended Use of the Device

Basic Safety Instructions

General Product Information

Bürkert Contact Address

Official contact information for Bürkert Fluid Control Systems.

Product Warranty Details

Details regarding the conditions for the device's warranty validity.

Online Product Information

Links and guidance on finding product information on the internet.

Product Description ME43

Technical Specifications

EU Conformity

States the device's compliance with relevant EU Directives.

Applicable Standards

Lists standards used to demonstrate conformity with EU Directives.

Operating Environment Conditions

Specifies permitted ambient temperature range and operating altitude.

Mechanical Specifications

Details device dimensions and housing material.

Electrical Specifications

Provides information on supply voltage, power, and protection class.

Device Labeling and Type Plate

Industrial Ethernet Protocols

Technical specifications for PROFINET and EtherNet/IP.

PROFIBUS DPV1 Specifications

CC-Link Specifications

Device Installation Guide

Installation Safety Precautions

Crucial safety measures and warnings during the installation process.

Mounting on DIN Rail

Step-by-step instructions for mounting the device on a standard rail.

Electrical Connection Procedures

Industrial Ethernet Connection Setup

Steps for establishing a connection via Industrial Ethernet.

PROFIBUS Connection Setup

CC-Link Connection Setup

Device Start-Up and Configuration

Start-Up Safety Precautions

Essential safety precautions before starting up the device.

Initial Base Settings

Basic configuration steps required for initial device operation.

Fieldbus Protocol Selection

Guide on choosing the appropriate fieldbus protocol for the device.

Fieldbus Gateway Configuration

Maximum Data Values (Objects)

Table showing maximum data value limits per protocol.

Gateway General Settings

Configuration of general parameters for the fieldbus gateway.

Declaring Inputs and Outputs

Defining device inputs and outputs for gateway configuration.

Fieldbus Address Mapping

Mapping addresses for specific fieldbus protocols.

Gateway Configuration Storage and Download

Saving and loading gateway configuration files.

BüS Network Configuration

Steps and procedures for setting up the büS network.

PLC Network Protocol Settings

Setting PROFIBUS Address

Procedure for setting the PROFIBUS address on the device.

Setting CC-Link Address

Procedure for setting the CC-Link address on the device.

Setting EtherCAT Address (Station Alias)

Procedure for setting the EtherCAT Station Alias.

Ethernet Parameter Configuration

Configuring Ethernet parameters for various industrial protocols.

Device Operation

Operation Safety Precautions

Critical safety measures and warnings during device operation.

Device Operating Elements

Identifies the physical controls and indicators on the device.

Operation via Device Display

Operating the device via its front panel display and buttons.

Key Functions Description

Explains the function of each control key on the device.

Operation via Bürkert Communicator Software

Operating and configuring the device using the PC software.

Connecting with Bürkert Communicator

Steps to establish communication between the software and the device.

Micro SD Card Data Management

Using the Micro SD card for data transfer and settings backup.

Device Display Elements

Overview of the device's display and status indicators.

Network Connection LEDs

Explanation of LEDs indicating network status and connectivity.

Device Status LEDs (NAMUR)

Explanation of device status LEDs according to NAMUR NE 107.

Setting Up the BüS Network

Industrial Ethernet to BüS Conversion

How the fieldbus gateway converts Industrial Ethernet data to büS.

BüS Device and Value Selection Principles

Principles for selecting büS devices and process values.

BüS Network Configuration Steps

Step-by-step instructions for configuring the büS network.

Downloading Gateway Configuration File

Procedure for loading a pre-existing configuration file to the device.

Web Server Access and Configuration

Connecting to the Web Server

Steps to establish a connection to the device's web server.

Accessing the Web Server Interface

How to access and navigate the device's web interface.

Ethernet Device Configuration

Detailed configuration steps for the Ethernet device via web interface.

Additional Device Settings

Settings via Device Display

Configuration options adjustable directly on the device's display.

Settings via Bürkert Communicator Software

Advanced settings and options configurable via the PC software.

Device Maintenance

Maintenance Safety Precautions

Essential safety measures and warnings for maintenance tasks.

Fieldbus Gateway Replacement

Step-by-step guide for replacing the fieldbus gateway.

Troubleshooting Guide

Error Code Descriptions

Comprehensive list and explanation of all device error codes.

Status Indicators and Actions

Interpreting status indicators and necessary actions to resolve issues.

Available Accessories

Device Disassembly

Packaging and Transport Guidelines

Storage Recommendations

Device Disposal Procedures