3
Setting Noise Reduction
N
172
Noise reduction is possible with images exposed for 1 sec. or longer.
1
Select [Long exp. noise
reduction].
Under the [
z
3
] tab, select [
Long
exp. noise reduction
], then press
<
0
>.
2
Set the desired setting.
Select the desired setting, then press
<
0
>.
Auto
For exposures of 1 sec. or longer, noise reduction is performed
automatically if noise typical of long exposures is detected. This
[
Auto
] setting is effective in most cases.
Enable
Noise reduction is performed for all exposures of 1 sec. or longer.
The [
Enable
] setting may reduce noise that cannot be detected with
the [
Auto
] setting.
3
Take the picture.
The image will be recorded with noise
reduction applied.
Long Exposure Noise Reduction
To Next Page
