Canon EOS 80D - Auto Exposure Bracketing (AEB)

201
By changing the shutter speed or aperture automatically, the camera
brackets the exposure up to ±3 stops in 1/3-stop increments for three
successive shots. This is called AEB.
* AEB stands for Auto Exposure Bracketing.
1
Select [Expo.comp./AEB].
 Under the [ z 2 ] tab, select
[
Expo.comp./AEB ], then press
<
0 >.
2
Set the AEB range.
 Turn the < 6 > dial to set the AEB
range. Press the <
Y > < Z > keys to
set the exposure compensation
amount.
 Press < 0 > to set it.
 When you exit the menu, the AEB
range will be displayed on the LCD
panel.
3
Take the picture.
 Three bracketed shots will be taken
according to the drive mode set in this
sequence: Standard exposure,
decreased exposure, and increased
exposure.
 AEB will not be automatically
canceled. To cancel AEB, follow step
2 to turn off the AEB range display.
Auto Exposure Bracketing (AEB)N
AEB range