425
3
Custom Function Settings
N
C.Fn III: Operation/Others
C.Fn III -1 Warnings z in viewfinder
When any of the following functions are set, the <
z
> icon can be
displayed on the viewfinder’s bottom right (p.29). The <
z
> icon will
also appear on the shooting function settings display (p.55).
Select the function for which you want the warning icon to appear,
press <
0
> to add a checkmark [
X
], then select [
OK
].
When monochrome
V
is set:
If the Picture Style is set to [
Monochrome
] (p.155), the warning
icon will appear.
When WB is corrected:
If white balance correction is set (p.167), the warning icon will
appear.
When
M
is set:
If [
z
3: High ISO speed NR
] is set to [
Multi Shot Noise
Reduction
] (p.170), the warning icon will appear.
When HDR is set:
If [
z
3: HDR Mode
] is set (p.207), the warning icon will appear.
C.Fn III -2 Dial direction during Tv/Av
0: Normal
1: Reverse direction
Dial turning direction when setting the shutter speed and aperture
can be reversed.
In the <
a
> shooting mode, the turning direction of the <
6
> and
<
5
> dials will be reversed. In other shooting modes, the turning
direction of only the <
6
> dial will be reversed. The <
5
> dial’s
turning direction in the <
a
> mode and the turning direction to set
the exposure compensation in the <
d
>, <
s
>, and <
f
> mode
will be the same.
To Next Page
Loading...
