Canon EOS 80D - Clear Settings

243
3 Setting the Flash N
For details on the external Speedlite’s Custom Functions, refer to the
Speedlite’s instruction manual.
1
Select [External flash C.Fn
setting].
2
Set the desired function.
 Select the number, then press < 0 >.
 Select the setting, then press < 0 >.
1
Select [Clear settings].
2
Select the settings to be cleared.
 Select [ Clear built-in flash set. ],
[
Clear external flash set. ], or [ Clear
ext. flash C.Fn set.
], then press
<
0 >.
 When you select [ OK ], the respective
flash settings or all the Custom
Function settings will be cleared.
External Speedlite Custom Function Settings
Clear Settings
With an EX-series Speedlite, the Speedlite will always fire at full output if the
[
Flash metering mode ] in Flash Custom Function is set to [ TTL ] (autoflash).
The Speedlite’s Personal Function (P.Fn) cannot be set or canceled on the
camera’s [Flash control] screen. Set it with the Speedlite.