H
Using Eye-Fi Cards
458
4
Display the connection
information.
Select [
Connection info.
], then press
<
0
>.
5
Check the [Access point SSID:].
Check that an access point is
displayed for [
Access point SSID:
].
You can also check the Eye-Fi card’s
MAC address and firmware version.
Press the <
M
> button to exit the
menu.
6
Take the picture.
The picture is transferred and the
<
H
> icon switches from gray (not
connected) to one of the icons below.
For transferred images, [
O
] is
displayed in the shooting information
display (p.348).
H
(Gray)
Not connected
: No connection with access point.
H
(Blinking)
Connecting...
: Connecting to access point.
H
(Illuminated)
Connected
: Connection to access point
established.
H
(
d
)
Transferring...
: Image transfer to access point in
progress.
To Next Page
Loading...
