Canon EOS M3 - Selecting a Range

103
Advanced Guide
Basic Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
Tv, Av, and M Mode
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
4
P Mode
5
Tv, Av, M, and C Modes
Before Use
Selecting a Range
1
Choose [Select Range].
● Following step 2 in “Using the Menu”
(
=
102), choose [Select Range] and
press the [ ] button.
2
Choose a starting image.
● Press the [ ] button.
● Press the [
][ ] buttons or turn the [ ]
dial to choose an image, and then press
the [ ] button.
Choosing Images Individually
1
Choose [Select].
● Following step 2 in “Using the Menu”
(
=
102), choose [Select] and press the
[ ] button.
2
Choose an image.
● Press the [ ][ ] buttons or turn the [ ]
dial to choose an image, and then press
the [ ] button. [ ] is displayed.
● To cancel selection, press the [
] button
again. [ ] is no longer displayed.
● Repeat this process to specify other
images.
3
Protect the image.
● Press the [ ] button. A conrmation
message is displayed.
● Press the [
][ ] buttons or turn the [ ]
dial to choose [OK], and then press the
[ ] button.
● Images will not be protected if you switch to Shooting mode or
turn the camera off before nishing the setup process in step 3.
● You can also select or clear images by touching the screen in
step 2, and you can access the conrmation screen by touching
[
].
● You can also protect images by touching [OK] on the screen in
step 3.