122
Advanced Guide
Basic Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
Tv, Av, and M Mode
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
4
P Mode
5
Tv, Av, M, and C Modes
Before Use
Sending Images to a Registered
Web Service
Registering Web Services
Use a smartphone or computer to add to the camera Web services that
you want to use.
● A smartphone or computer with a browser and Internet connection is
required to complete camera settings for CANON iMAGE GATEWAY
and other Web services.
● Check the CANON iMAGE GATEWAY website for details on browser
(Microsoft Internet Explorer, etc.) requirements, including settings and
version information.
● For information on countries and regions where CANON iMAGE
GATEWAY is available, visit the Canon website (http://www.canon.
com/cig/).
● You must have an account with Web services other than CANON
iMAGE GATEWAY if you desire to use them. For further details, check
the websites for each Web service you want to register.
● Separate ISP connection and access point fees may be applicable.
5
Import images.
● Follow steps 6 – 9 in “Adding a
Smartphone Using the Wi-Fi Menu”
(
=
118) to select the smartphone to
connect to and to congure the privacy
settings, and then import the images.
● To determine the access point password, check on the access
point itself or refer to the user manual.
● Up to 16 access points will be displayed. If no access points are
detected even after you choose [Refresh] in step 2 to update the
list, choose [Manual Settings] in step 2 to complete access point
settings manually. Follow on-screen instructions and enter an
SSID, security settings, and a password.
● When you reconnect to a previous access point, “*” is displayed
for the password in step 3. To use the same password, choose
[Next] (either press the [
][ ] buttons or turn the [ ] dial) and
press the [
] button.
Previous Access Points
To reconnect to a previous access point automatically, follow step 4 in
“Adding a Smartphone Using the Wi-Fi Menu” (
=
118).
● To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
● To use a different access point, select [Switch Network] on the screen
displayed when you establish a connection, and then either follow step
4 in “Using WPS-Compatible Access Points” (
=
120) or step 2 in
“Connecting to Listed Access Points” (
=
121).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
