First Level
Second Level
Third Level
Fourth Level
Fifth Level
Sixth Level
Seventh Level
Eighth Level
CarriageS-
canWdth
Automatic* | Fixed
Use
USB(*8)
On* | Off
Use Ether-
net(*8)
On* | Off
Use Remo-
teUI(*8)
On* | Off
Reset PaprSetngs(*8)
Erase HDD
Data
High Speed(*8) | Secure High Spd.(*8) | Secure(*8)
Output
Method
Print* | Print (Auto Del) | Save: Box XX
Print After
Recv
Off* | On
Common
Box Set.
(
*5
)(
*8
)
Print* | Print (Auto Del)
Show Job
Log(*8)
Off | On*
Take-up
Reel(*12)
Use Take-
up Reel
Disable* | Enable
Auto Feed(*13)
Skip Take-
Up Err(*14)
Off* | On
Prep.Move-
Printer
Level 1 | Level 2 | Level 3
Admin.
Menu(*8)
Change
Pass-
word(
*9
)
(The screen for setting the password is displayed)
Init.Admin.Pswd(*9)
Adj. Fine Feed(*15)(*16)
Printer In-
fo(*15)
Paper Info
Ink Info
Head Info
System Info
Error Log
Use Situa-
tion
Tot.Print Area | Duty Counter
*1:Available after you have used Standard or Initial adjustmt in Head Posi. Adj. once.
*2:Available if Adj. Priority is Automatic or Print Quality.
*3:Available if Adj. Priority is Automatic or Print Length.
*4:Available only if Use Nesting is On.
*5:Not displayed if IPv4 Mode is Manual.
*6:Not displayed if Auto Detect is On.
*7:Follows the setting in Date Format.
*8:Restrictions apply if a password is configured using Change Password in the Admin. Menu.
Viewing and configuration is possible for administrators, and only viewing for other users.
*9:Restrictions apply if a password is configured using Change Password in the Admin. Menu.
Viewing and configuration is possible for administrators only.
*10:Not displayed if IPv6 Support is Off.
*11:Default setting for the time to enter the power save mode/Sleep mode is recommended.
*12:Displayed only when the Media Take-up Unit is attached.
Menu Structure
iPF830
User's Guide
Control Panel Printer Menu
440
To Next Page
Loading...
