Assemble the stand
1
Referring to the Printer Stand Setup Guide, assemble the Stand.
Caution
•
The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself
poses a risk of injury or bending the Stand.
•
When assembling the Stand, lock the casters. In addition, always unlock the casters before moving the
assembled Stand. Attempting to move the stand when the casters are locked poses a risk of injury or
damage to the location site.
Install the printer
1
Mount the printer on the assembled Stand and tighten the
screws firmly.
Caution
•
Moving the printer requires at least six people, holding it on both sides. Be careful to avoid back strain
and other injuries.
•
When moving the printer, firmly grasp the Carrying
Handles (a) under each side. The printer may be un-
steady if you hold it at other positions, which poses a
risk of injury from dropping the printer.
2
Attach the Stationary Output Stacker to the Stand by refer-
ring to Printer Stand Setup Guide.
Reinstalling the Printer
iPF830
User's Guide
Maintenance and Consumables Other Maintenance
600
To Next Page
Loading...
