3
If you are using the optional Media Take-up Unit, attach the
Media Take-up Unit to the Stand by referring to the Setup
Guide included with the Media Take-up Unit.
4
Remove tape and packaging material attached to the print-
er. Also open the Top Cover and remove stoppers and
spacers inside the printer.
5
Lift the Ejection Guide and attach the four Ejection Sup-
ports to the back of the Ejection Guide.
6
Connect the power cord to the Power Supply Connector on the
back of the printer.
7
Plug the power cord into the outlet.
iPF830
Reinstalling the Printer
User's Guide
Maintenance and Consumables Other Maintenance
601
To Next Page
Loading...
