8
Press the power button to turn the printer on.
When the message "Has printer been reinstalled? (Do
not load ink tanks yet.)" is displayed, select Yes and
press the OK button.
9
Open the Ink Tank Cover and install the ink tanks.
10
Attach the Roll Holder to the Roll Media.
(See "Attaching the Roll Holder to Rolls.")
➔P.330
11
Load the Roll Media in the printer.
(See "Loading Rolls in the Printer.") ➔ P.333
12
Install the software.
Note that the driver installation procedure varies depending on the type of connection.
Reinstalling the Printer
iPF830
User's Guide
Maintenance and Consumables Other Maintenance
602
To Next Page
Loading...
