Canon iR5000 - Removing the Blade Unit

COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 4 IMAGE FORMATION SYSTEM
4-74 P
7.9.2 Removing the Blade Unit
1) Take the developing assembly out of the
machine.
2) Remove the two mounting screws [1],
and detach the developing assembly
cover [2].
F04-709-03
3) Place a newspaper on the floor or a
desk, and pour out the toner onto the
newspaper from the developing assem-
bly.
4) Remove the two mounting screws [3],
and detach the blade unit [4] together
with its mounting base.
F04-709-04
The blade must be mounted
with a high accuracy. Do not
remove it on its own in the field
(i.e., be sure to remove it intact
with its mounting base).
[1]
[2]
[1]
[3] [4] [3]
Download Free Service Manual at http://printer1.blogspot.com