Canon iR5000 - Page 384

COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 6 FIXING SYSTEM
6-3 P
Description
Heat roller (50-mm dia.)
Pressure roller (38-mm dia.)
24VDC
24VDC
120/230-V model: 600 W
100-V model: 700 W
120/230-V model: 600 W
100-model: 470 W
Used for temperature control, error detection
Used for error detection
Operates at 240 ±10°C
• Driven by web drive solenoid (SL2)
• For large-size paper (B4 or larger), turns on twice
for the 1st sheet, and then once for the 2nd and 3rd
sheets; repeats the sequence thereafter
• For small-size paper (smaller than B4), turns on
once for the 1st and 2nd sheets, and remains off for
the 3rd sheet; repeats the sequence thereafter
Moves in reciprocating motions (about 3 mm)
Moves up/down (about 1.8 mm)
T06-101-02
Component
Fixing upper roller
Fixing lower roller
Fixing motor
Fixing assembly inlet
guide drive solenoid
Main heater
Sub heater
Main thermistor
Sub thermistor
Thermal switch
Cleaning web
Upper separation claw
Notation
M19
SL1
H1
H2
TH1
TH2
TP1
Download Free Service Manual at http://printer1.blogspot.com