Canon MultiPASS MP390 - 11 Receiving Faxes; Flow of Receiving Faxes

104 Receiving Faxes Chapter 11
Chapter
11
Receiving Faxes
FAX
X Flow Of Receiving Faxes
The operation flow of receiving faxes is as follows:
NOTE
• You have to connect a telephone to the external device jack when you set <MANUAL MODE>, <FAX/TEL
AUTO SW> or <DRPD>.
• You have to connect an answering machine to the external device jack when you set <ANS.MACHINE
MODE>.
Step 2
Step 1
Load paper in the multi-purpose tray. (See page 27)
Select the receive mode.
z If you want to receive faxes automatically as well as voice calls:
<FAX/TEL AUTO SW> (See page 105)
z If you want to receive only faxes automatically with your machine, or
you have a dedicated telephone line for fax use only:
<FAX ONLY MODE> (See page 105)
z If you have subscribed to a Distinctive Ring Pattern Detection (DRPD)
service with your telephone company:
<DRPD> (See page 106)
z If you receive mainly voice calls and sometimes faxes, or you want to
receive faxes manually:
<MANUAL MODE> (See page 106)
z If you want to receive voice messages on your answering machine and
receive faxes automatically:
<ANS.MACHINE MODE> (See page 106)