7
XReading The Document
Symbols Used In This Guide
Please read the list below of symbols used in this guide. The following symbols are used to indicate
important instructions. Be sure to obey these instructions.
WARNING
Indicates a warning concerning operations that may lead to death or
injury to persons if not performed correctly. In order to use the machine
safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to
persons or damage to property if not performed correctly. In order to
use the machine safely, always pay attention to these cautions.
IMPORTANT
Indicates operational warnings and restrictions. Be certain to read these
items to operate the machine correctly, and to avoid damage to the
machine.
NOTE
Indicates notes for operation or additional explanations. Reading these is
highly recommended.
See Set-Up Sheet Refer to the Set-Up Sheet for more information.
See Software Guide Refer to the Software Guide (included on the Setup CD-ROM) for more
information.
(See page nn) Indicates a page number where additional information can be found.
Indicates the description of the machine when used as a fax.
Indicates the description of the machine when connected to a computer.
z (Operation
branch title)
Used for an operation that can be performed in branch procedures.
1. (Operation
branch-step)
Used to explain each operation of a branch procedure.
FAX
PC
To Next Page
Loading...
