Chapter 3 Copying 41
Creating A Mirror Image
This feature enables you to make a mirror copy of a document. Use this feature when copying onto
T-shirt transfers so that the image is oriented correctly when ironed onto fabric.
NOTE
Use T-shirt transfers when the image will be ironed onto T-shirts. (See page 21)
Follow this procedure:
1 Load the document on the platen glass.
2 Press [COPY].
3 Use [W] or [X] to select the number of copies, or enter the number using
the numeric keys (max. 99 copies).
NOTE
For the maximum load limit for the paper you are using in the multi-purpose tray, see page 21.
4 Adjust the settings for your document as necessary.
NOTE
• To select the paper size and type, see page 30.
• To select the image quality, see page 32.
• To select the scanning exposure, see page 33.
• To select the copy ratio, see page 33.
5 Press [Menu] repeatedly until <5.SPECIAL COPY> appears.
6 Use [W] or [X] to select <MIRROR IMAGE>.
7 Press [Set].
8 Press [Color] for color copying, or [Black] for black & white copying.
NOTE
To cancel copying, press [Stop/Reset].
Document Printing result Transfer
5.SPECIAL COPY
W
2 on 1 X
5.SPECIAL COPY
W
MIRROR IMAGE X
Ex:
100% LTR NORMAL
0 1
MIRROR
To Next Page
Loading...
