Canon MultiPASS MP390 - Setting Daylight Saving Time

Chapter 9 Preparing Your Machine For Fax 91
X Setting Daylight Saving Time
You can set your machine to automatically change the time by registering the day and time that
daylight saving begins and ends.
Follow this procedure:
1 Press [Additional Functions].
2 Use [W] or [X] to select <9.DAYLGHT SAV TIME>.
3 Press [Set].
4 Use [W] or [X] to select <ON> to enable daylight saving or <OFF> to disable
it.
z If you select <OFF>:
1. Go to step 21.
z If you select <ON>:
1. Go to step 5.
5 Press [Set] three times.
6 Use [W] or [X] to select the month when daylight saving starts.
7 Press [Set] twice.
8 Use [W] or [X] to select the week when daylight saving starts.
–<FIRST WEEK>
–<SECOND WEEK>
–<THIRD WEEK>
–<FOURTH WEEK>
–<LAST WEEK> (fourth or fifth week depending on the month)
9 Press [Set] twice.
10 Use [W] or [X] to select the day when daylight saving starts.
Ex:
DAYLGHT SAV TIME
ON
Ex:
MONTH
APRIL
Ex:
WEEK
FIRST WEEK
Ex:
DAY
SUNDAY