Canon MultiPASS MP390 - Setting VIVID Photo Printing

48 Photo Printing From A Memory Card Chapter 4
Setting Vivid Photo Printing
Enabling this setting will make photographs appear more vibrant, especially blues and greens.
NOTE
You can set vivid photo printing in the following printing methods.
– All images (See page 54)
– Index (See page 57)
– Single image (See page 59)
– Range of images (See page 61)
– DPOF (See page 64)
z To adjust the amount of image that extends off the paper (extension amount):
1. Press [Additional Functions].
2. Use [W] or [X] to select <5.EXTENSION AMOUNT>.
3. Press [Set].
4. Use [W] or [X] to select the extension amount.
–<SMALL> : Reduces the amount of image that extends off the paper.
–<LARGE> : Enlarges the amount of image that extends off the paper.
5. Press [Set].
6. Press [Stop/Reset] to switch the machine to exit.
z To enable/disable vivid photo printing:
Example
1. Press [PHOTO PRINT].
2. Press [Menu] once until <1.PHOTO PRINT MODE> appears.
3. Use [W] or [X] to select the printing method, and then press [Set].
4. Use [W] or [X] to select the paper size, and then press [Set].
5. Use [W] or [X] to select the paper type, and then press [Set].
6. Use [W] or [X] to enable or disable borderless printing, and then press [Set].
7. Use [W] or [X] to select date printing or not, and then press [Set].
<VIVID PHOTO> is displayed on the LCD.
NOTE
The menu number may differ, depending on the photo print settings.
USER DATA
5.EXTENSION AMOUNT
Ex:
EXTENSION AMOUNT
SMALL
Ex:
6.VIVID PHOTO
W
OFF
X