Chapter 12 Maintenance 119
Using The Calibration Function
If the color tone of copies or scans of photos differs from that of the original, you can use the
calibration function to adjust the color tone printed.
Follow this procedure:
9 Press [Set].
10 Repeat steps 8 and 9 for columns B to K.
1 Press [Additional Functions].
2 Use [W] or [X] to select <3.MAINTENANCE>.
3 Press [Set].
4 Use [W] or [X] to select <6.CALIBRATION>.
5 Press [Set].
• The machine starts calibrating.
• When calibration completes, the machine switches to the standby mode.
Ex:
CHANGE H VALUE
B O
MAINTENANCE
6.CALIBRATION
CALIBRATING...
To Next Page
Loading...
