Canon MultiPASS MP390 - Before Sending Faxes; Adjusting The Image Quality (Fax Resolution)

Chapter 9 Preparing Your Machine For Fax 95
X TX REPORT
Your machine can print a TX (transmission) REPORT after sending a document. You can set the
machine to print every time it sends a document, or only when an error occurs. Alternatively, you
can disable printing of a report.
NOTE
• For details on the TX REPORT setting, see page 155.
• The default setting is <PRINT ERROR ONLY>.
X RX REPORT
Your machine can print an RX (reception) REPORT after receiving a document. You can set the
machine to print every time it receives a document, or only when an error occurs. Alternatively,
you can disable printing of a report.
NOTE
• For details on the RX REPORT setting, see page 156.
• The default setting is <OUTPUT NO>.