118 Maintenance Chapter 12
Aligning The Print Head
If you have printed the nozzle check pattern (see page 115) and determined that the print head needs
aligning, align it from the operation panel.
NOTE
You can also align the paper from your computer. (See Software Guide, located on your Setup
CD-ROM)
Follow this procedure:
1 Load letter- or A4-size plain paper in the multi-purpose tray.
2 Press [Additional Functions].
3 Use [
W
] or [
X
] to select <3.MAINTENANCE>.
4 Press [Set].
5 Use [
W
] or [
X
] to select <4.ALIGN PRINT HEAD>.
6 Press [Set].
The machine prints a print head position pattern.
7 Beginning from column A on the printout, enter checkmarks in the
patterns that have the most solid image.
8 Use [
W
] or [
X
] to select the pattern number that you checked in column A
on the printout in step 7.
PC
MAINTENANCE
4.ALIGN PRINT HEAD
HORIZ. PATTERN
PRINTING...
Ex:
CHANGE H VALUE
A O
Column
Select pattern number with most solid image.
To Next Page
Loading...
