46 Photo Printing From A Memory Card Chapter 4
Removing A Memory Card
Follow this procedure:
CAUTION
• If an error occurs during printing from the memory card (e.g. paper runs out), do not remove the
memory card or CompactFlash card adapter containing a memory card as this may damage the data
on the memory card.
• While the Access lamp is lit or flashing, do not remove the memory card or the CompactFlash card
adapter containing a memory card as this may damage the data on the memory card.
NOTE
If the memory card cannot be read, check that:
– the memory card or CompactFlash card adapter containing the memory card is inserted all the way
into the card slot.
– you are using a compatible memory card.
– your memory card contains image data.
1
Press [ON/OFF] to turn OFF the machine.
If you have been writing to a memory card in Windows 2000, wait at least 10 seconds
before turning OFF the machine.
2 Remove the memory card from the card
slot.
To remove the xD-Picture Card (CompactFlash
card adapter), Microdrive memory card, or
CompactFlash, first press the button at the
bottom of the card slot.
For the MEMORY STICK, MultiMediaCard,
SmartMedia, or SD Secure Digital memory card,
remove the card without pressing the button.
Ex: CompactFlash card
adapter, Microdrive
memory card, or
CompactFlash
PC
A
To Next Page
Loading...
