150 Appendix Chapter 14
Settings
To find the setting you want to change, see the following menu lists.
NOTE
• Default settings are shown in bold type.
• The settings changed using [Additional Functions] and [Menu] are not returned automatically to the settings
you set previously. Change to the previous settings again if necessary.
Function Key: [COPY]
Menu: ENLARGE/REDUCE
Menu: PAPER SELECT
For details, see page 30.
Menu: DENSITY
For details, see page 33.
z If you press [Additional Functions]:
1. Use [W] or [X] to select the menu with the setting you want to change.
2. Go to step 4.
4 Press [Set].
If you have completed selecting the setting, go to step 6.
5 Scroll through and register settings by the following operations.
•Use [W] or [X] to scroll through settings.
• To register a setting or access sub-settings, press [Set].
To further access sub-settings, repeat this operation.
• If you select the wrong setting, press [Stop/Reset] and repeat the procedure from step 3.
6 When you have finished, press [Stop/Reset], if necessary.
NOTE
The asterisk < > on the LCD indicates the current setting.
Name Description Settings Details
PRESET RATIO Makes enlarged or reduced copies at preset ratios. 25% MIN.
95% A4 J LTR
100%
170% 5"
×7" J LTR
212% 4"
×6" J LTR
400% MAX.
page 33
ZOOM Makes enlarged or reduced copies at ratios
between 25% and 400%.
25% to 400% page 34
FIT-TO-PAGE Automatically reduces or enlarges an image to fit
on the specified paper size.
—page35
To Next Page
Loading...
Need help?
General
