Canon MultiPASS MP390 - Loading Paper

Chapter 2 Document And Paper Handling 27
X Loading Paper
Loading Paper
IMPORTANT
Load plain paper (letter- or A4-size) when receiving faxes.
Follow this procedure:
6 Press [X].
NOTE
When not replacing an ink tank, be sure to press [X], and no other key.
1 Set the paper thickness lever to the right or left according to the paper
type.
NOTE
• For the appropriate paper thickness lever position for each paper type, see page 21.
• For details on setting the paper thickness lever, see page 26.
2 Open the multi-purpose tray , then pull
out the tray extension .
The tray extension can be extended in two parts.
3 Place a stack of paper (print side up) in
the multi-purpose tray , and pinch the
paper guide and adjust it to the left
side of the stack .
IMPORTANT
Make sure the stack does not exceed the paper
limit mark .
1
2
A
1
2
B