Chapter 1 Introduction 11
z Rear view and interior
External device jack Connects the external device.
Telephone line jack Connects the telephone line.
Power connector Used to connect the power cord to the machine.
USB connector
(for computer)
Used to connect a computer to the machine when printing or faxing
from or scanning to the computer.
Access lamp Lights when a memory card is inserted into the card slot. This lamp
flashes while the machine is reading or writing data from/to the memory
card. When the machine finishes reading or writing the card, the lamp
shuts off.
Card slot Insert a memory card or CompactFlash card adapter containing a
memory card into these slots when photo printing. The machine is
equipped with two kinds of card slots.
Memory card eject
button
Press this button to remove the CompactFlash card adapter, Microdrive
memory card, or CompactFlash from the card slot. For details, see
page 46.
Print head holder Used to install a print head.
Inner cover Open this cover when setting the paper thickness lever, replacing the
ink tanks, or clearing a paper jam.
CAUTION
Printing with the inner cover open may result in injury.
Scan unit Lift this unit until it locks into place when the inner cover needs to be
opened.
Paper thickness
lever
Switches the distance between the print head and paper according to the
paper type. Adjust the lever to the position appropriate for the paper
loaded.
To Next Page
Loading...
