138
If a preset has already been added to [Edit Tour Route] and is selected when another preset is added from the [Select Preset] list,
the added preset will be displayed below the selected preset.
Select the preset to configure in [Edit Tour Route] and set the tour operation.
[Speed (PT)]
Select the camera pan/tilt speed for moving to the next preset.
[Speed (Z)]
Select the camera zoom speed for moving to the next preset.
[Pause (sec)]
Enter the time the camera pauses at the preset position.
If you want to view video during moves between presets, select a slow speed. If you only want to switch quickly to view video at the
preset positions, select a fast speed.
Click [Apply] after configuring the route. The setting will be saved to the camera.
Click [Clear] to set the route again. The settings saved in the camera are restored. However, note that presets only added to the
[Edit Tour Route] by clicking [Add] are all discarded.
6
Configure the preset speed and pause duration.
7
Click [Apply].
R12 M50
R12 M50
To Next Page
Loading...
