78
The Digital PTZ uses digital zoom, so the higher the digital zoom ratio, the lower the video quality.
Using Presets or the Home Position
You can use a registered preset or home position to specify the range for Digital PTZ.
If you select a preset, the preview frame on the Digital PTZ panel moves to the preset position, and the video inside
the frame is displayed in the video display area.
Register presets in advance in [Camera] > [Preset] > [Preset Registration] on the Setting Page (P. 131).
Exiting Digital PTZ
The Digital PTZ exits if you perform one of the following operations.
• Click the [Digital PTZ] button to disable it.
• Click the [Viewer PTZ] button to start the Viewer PTZ
You can perform the following operations to continue Digital PTZ while the [Digital PTZ] button is active (purple).
– Click the [Close] button on the control display area to close the Digital PTZ panel
– Click the panorama display tab or snapshot tab to switch the panel in the control display area
To Next Page
Loading...
