Car-O-Liner CTR9 - Rotating the C-Tong Gun

Car-O-Liner Group AB CTR9
34 49023, EN - rev. 4, 2020-01
3.9.1 Rotating the C-Tong gun
To facilitate welding, the C-Tong gun can be rotated to desired position.
This can be performed in two ways:
1. Rotating complete C-Tong gun 360
o
continuously, when suspended
in the Support arm, see 3.12 Support arm:
1. Hold the C-Tong handle.
2. Rotate C-Tong to desired position.