Car-O-Liner CTR9 - Dent Puller - for Washers and Triangular Pulling Eye

Car-O-Liner Group AB CTR9
92 49023, EN - rev. 4, 2020-01
6.10.6 Dent puller - for washers and triangular pulling eye
When using the dent puller, standard procedures are welding of washers or
triangular pulling eye.
1. Select "Dent puller" tool by pressing the "up/down" button.
2. Set welding time and current.
Triangular
pulling eye
Dent puller
Pulling hook
Washer
Holder for washer
Locking nut
Holder