Car-O-Liner CTR9 - Page 58

Car-O-Liner Group AB CTR9
58 49023, EN - rev. 4, 2020-01
IMPORTANT! The A-Tong adapter connection shank and the yoke holder
must be greased with a small amount of copper paste before assembling to
prevent sticking and to maintain proper electrical conductivity.
3. Grease the A-tong adapter connection shank [a] and
the yoke holder [b] with a small amount of copper paste.
Mount the A-Tong adapter.
4. Lock the A-tong adapter by tightening the yoke locking lever.