Push to Talk
select the PTT Group, press the Center Select
Key c [MARK], and then press the Left Soft
Key L [Done].
5. Press the Center Select Key c [SAVE].
Erasing a PTT Contact
To erase a PTT Contact:
1. From standby mode press the Center Select Key
c [MENU], 5 PTT Contact List.
2. Press the Directional Key j up or down to
highlight the existing PTT Contact entry.
3. Press the Right Soft Key R [Options], then
press 4 Erase.
4. Press the Directional Key j up or down to
select Yes.
5. Press the Center Select Key c [OK].
PTT Groups
1. From standby mode press the Center Select Key
c [MENU], 6 PTT Groups.
2. Press the Directional Key j up or down to scroll
through your PTT Groups List, and you can
select the following options.
• Press the Directional Key j up or down to
highlight the PTT Group, then press the Right
Soft Key R [Options] to select from the
following: Rename/Erase/Add/Sort.
123
To Next Page
Loading...
Need help?
General
