Push to Talk
3. Press the Right Soft Key R [Options], then
press 1 Rename.
4. Enter the new name into the PTT Group Name
field, then press the Center Select Key c
[SAVE].
k Erase PTT Group
1. From standby mode press the Center Select Key
c [MENU], 6 PTT Groups.
2. Press the Directional Key j up or down to
highlight the PTT Group.
3. Press the Right Soft Key R [Options], then
press 2 Erase.
4. Press the Directional Key j up or down to
select Yes.
5. Press the Center Select Key c [OK].
Temp PTT Group
The following operation temporarily assigns a PTT
Contact to a Group. By doing so, displaying the Temp
PTT Group and holding down the PTT Key , will
perform a Barge Call.
k Add PTT Contacts
1. From standby mode press the Center Select Key
c [MENU], 5 PTT Contact List.
125
To Next Page
Loading...
Need help?
General
