Contacts in Your Phone’s Memory
6. Press the Center Select Key c [OK].
A confirmation message appears.
Phone Numbers with Pauses
Pauses are used for automated systems (i.e.
voicemail or calling cards). Insert a pause after a
phone number then enter another group of numbers.
The second set of numbers is dialed automatically
after the pause. This feature is useful for dialing into
systems that require a code. There are two different
types of pauses you can use when storing a number.
k Wait (W)
The phone stops dialing until you press the Left Soft
Key L
[Release] to advance to the next number.
k 2-Sec Pause (P)
The phone waits 2 seconds before sending the next
string of digits automatically.
k Storing a Phone Number with Pauses
1. From standby mode enter the phone number.
2. Press the Right Soft Key R [Options].
3. Press the Directional Key j up or down to
select pause type, then press the Center Select
Key c [OK].
2-Sec Pause/Wait
49
To Next Page
Loading...
