4. Press the Directional Key j up or down to
select the type of phone number you want to
save, then press the Center Select Key c [OK].
Mobile 1/Mobile 2/Home/Work
5. Enter a name for the contact (up to 32
characters), then press the Center Select Key
c [SAVE].
6. CONTACT SAVED appears on the display. The
phone number reappears on screen. Press the
End/Power Key
to exit, or press the Send
Key
to call the number.
NOTE
Use Update Existing to add another phone number to
a contact already stored in memory (see page 44).
Options to Customize Your Contacts
Once the basic phone number and name information
is stored in your Contacts, you can edit and/or
customize the entries.
1. From standby mode press the Right Soft Key R
[Contacts], then press the Directional Key j
up or down to highlight the Contact entry you
want to edit.
2. Press the Left Soft Key L [Edit] to access the
EDIT CONTACT screen.
3. Press the Directional Key j up or down to
highlight the information field you want to
customize. Additional fields include:
40
To Next Page
Loading...
Need help?
General
