• Calls & Services: Allows you to edit the Lock
Code for all Calls & Services.
5. Enter the new four-digit code in the Enter New
Code field.
If you selected Calls & Services in step 4, you
also will need to enter the current code before
entering the new code.
6. Press the Directional Key d down to advance to
the Re-enter New Code field.
7. Enter the new four-digit code again as
confirmation.
8. Press the Center Select Key [OK].
NOTE
There are two Lock Codes: Phone Only and Calls &
Services.
k Restrictions
Use the following procedure to configure Location
Setting, Calls, Messages, and Dial-Up Modem
restrictions.
1. From standby mode press the Center Select
Key c [MENU], then press the Directional Key
r right twice for SETTINGS & TOOLS, 6
Phone Settings, 6 Security.
2. Enter the four-digit Lock Code, then press
the Center Select Key c [OK]. The default
Lock Code is the last 4 digits of your mobile
telephone number.
3. Press 2 Restrictions.
176
To Next Page
Loading...
