2
ENGLISH
EN
Introduction 3
Control panel 3
Switching on the welding machine 4
Welding process configuration menu 5
TIG “AC” Welding 10
TIG “DC” welding with “HF”, “LIFT TIG” and “HF PERFECT POINT” welding 14
TIG RCT “RUNNING COLD TACK” Process 19
Electrode Welding (MMA AC) 22
Electrode Welding (MMA DC) 23
Activating the VRD device (MMA AC - MMA DC) 25
Changing general welding parameter limits 26
Configuration menu 27
Displaying the software version installed 30
Firmware update 31
Factory default 32
JOB - Creating and saving welding programs 33
JOB - Viewing and loading a saved program 33
JOB - Viewing the parameters set for a saved program 34
JOB - Naming, deleting, moving, and copying a program saved 35
JOB - Setting the shortcut key to your preferred saved program 36
JOB - Manual welding 36
JOB - Salving and uploading saved programs to a USB stick 37
JOB - Selecting a JOB using the TIG torch’s “UP / DOWN” keys (sequences) 37
JOB SCAN - Selecting a sequence of JOBS while using a standard TIG torch with one button 38
Saving and uploading the welding machine’s welding settings and parameters onto a USB stick 39
Remote control connection 40
Locking the display panel 42
Locking / unlocking the display panel using a password 43
Energy saving menu 44
Error conditions and protections 45
Hardware test menu 46
Errors page menu 47
Diagnostics menu 48
To Next Page
Loading...
