4
Switching on the welding machine
Move the power switch on the generator to “I” to switch the welding machine on .
The welcome page shown below appears for a few seconds.
SWITCHING ON SUBSEQUENTLY
The welding machine sets itself up on the weld page, with the last configuration prior to being switched off.
ACTION RESULT
Push the HOME key
WELD page
Push the HOME key again
Welding PROCESS configuration page
ACTION RESULT
Push the HOME key
Welding PROCESS configuration page
SWITCHING ON FOR THE FIRST TIME OR AFTER A COMPLETE RESET PROCEDURE
GENERAL
LANGUAGE ENGLISH
SOUND ON
SET BUTTON GAS FLOW TEST
FULL RESET NO
LANGUAGE Choose the language - ENGLISH / ITALIANO / ...
To Next Page
Loading...
