CEA MATRIX X220 AC/DC - Errors Page Menu

47
Errors page menu
The errors page menu shows the errors currently active on the welding machine.
To access this information go to the “CONFIGURATION” menu and select the “UERROR PAGE” menu.
You can access the “CONFIGURATION” menu by:
• Holding down the SET key for 5 seconds.
• By selecting the icon
from the process setting page.
• Select the “ERROR PAGE” menu.
CONFIGURATION
GENERAL
WELDING
INFORMATION
ERROR PAGE
PANEL LOCK
MAIN MENU MAIN SUB-MENU
PARAMETERS /
HIGH - LOW LIMIT
DEFAULT
VALUE
NOTE
ERROR PAGE Shows current errors