31
10. When the dwell time is complete, several audible beeps will be heard, signaling
the end of the ashing time.
WARNING
To prevent the possibility of serious burns, ensure that insulated
gloves and protective gear as outlined in the user’s safety program
are worn and metal tongs are used to insert and remove sample con-
tainers from the ashing furnace.
11. Open the instrument door. Remove the furnace door. Place the furnace door in
the furnace door holder. Using metal tongs, remove the ashing crucibles con-
taining the samples from the furnace.
Note: Press the START key to maintain the programmed temperature.
12. To ash additional samples using the same parameters, repeat steps 6 through 11.
13. To end the Quick Test method, press the STOP key.
To Next Page
Loading...
Need help?
General
